Asphalt Shingle Roof Replacement with Decking Repair in Kings Park, NY
This Kings Park, NY roofing project involved a residential asphalt shingle roof replacement on a hip-style roof. The work included removing the existing roofing, opening the roof surface down to the decking, addressing localized plywood sheathing where needed, and installing the finished shingle roof with clean hip and ridge cap lines.
Roofing jobs like this need steady sequencing. Once the old shingles come off, the roof deck has to be checked carefully before the new roof surface goes back on. In this case, the exposed decking showed areas where plywood work was part of the job, while the finished roof views show completed gray asphalt shingles, hip and ridge caps, and roof detailing around existing penetrations and transitions.
The chimney area and roof window/skylight area were part of the roof layout, so those sections required careful attention during the roofing work. We kept the scope focused on the roof replacement and related roof-surface details, without turning it into a chimney rebuild or skylight replacement.
Project Scope
- Residential roof replacement in Kings Park, NY
- Tear-off and removal of the existing asphalt shingle roofing
- Roof deck exposed during the demo phase for inspection and prep
- Localized plywood sheathing repair where visible roof decking work was needed
- Installation of new asphalt shingles on the main roof surfaces
- Hip and ridge cap shingle installation on the hip-style roof sections
- Roofing work coordinated around the existing brick chimney area
- Roofing detail work around the existing roof window/skylight area
- Exterior jobsite management during the active roofing work
Project Notes
The key part of this job was keeping the roof work moving in the right order: tear-off first, decking review and localized plywood work next, then shingle installation and cap work. That sequence matters on a residential roof because exposed decking should not sit open longer than needed once roofing has been removed.
Care was also needed around the chimney and roof window/skylight area. These roof features create transitions in the shingle field, and those transitions have to be handled cleanly during installation. The finished roof surface shows the main shingle runs tied together with cap shingles along the roof hips and ridges.
This was not a whole-house remodel or a masonry project. It was a roofing job focused on replacing the asphalt shingle roof surface, handling localized roof decking repair, and closing the roof back in with a clean finished installation.
Service Area
BuildingLI handles residential roofing and exterior repair work in Kings Park, NY, along with Huntington, Northport & Fort Salonga, and most of Long Island.
Plan a Roofing or Exterior Repair Project
If your roof needs replacement, repair planning, or exterior project coordination, start by reviewing our services, send the basic project details through our intake form, or reach out through our contact page to discuss the next step.
Project Photos
